上海凯贤印刷科技有限公司
PP免处理油墨
  • PP免处理油墨
      分享到:
    当前价格 140 元/kg
    起 订 量 10000
    有效期 永久
    更新时间 2016-04-20 09:52:38
    联系电话 021-59507952-107 [拨打]
    手  机 15900568152 [拨打]
      <-----  向左滑动显示详细信息
  • PP免处理油墨

    油墨特性:拥有和德国彩丽宝一样的颜色,主要用于PP、PE、BOPP等材料上,具有高色泽、高色彩、高遮盖力、高稳定性、耐酒精及耐磨擦之特点。 
      印刷:丝印移印均可。 
      表干及实干时间:表干时间自然挥发5-10分钟;实干时间在24小时以内。 
      稀释及清洗:SV3慢干开油水、UVK1(移印开油水)同时可使用718洗网水清洗。 
       
      测试方法(完全干燥后): 
      1、3m胶纸粘在画有百格的油墨表面,45度角迅速拉起不脱油; 
      2、纯度99%的工业酒精,一千克砝码用棉布包住在油墨表面,以水平力来回拉200次无脱色; 
      3、耐磨:橡皮擦500g力水平来回擦500次。 
       
      使用方法: 
      1、使用前应充分搅拌,用后随时封闭; 
      2、搅拌时加开油水10-15%,稀释到印刷粘度; 
      3、网板塞网时可用洗网水清洗; 
      4、不得与其它类型油墨混合使用。 
       
      注意事项: 
      1、塑胶材料的外观相似,但可能会是不同的材料,客户需试印确定其符合要求后,再批量印刷; 
      2、在移印过程中,如出现拉丝或散开,可适当加入一些慢干膏即可; 
      3、环境温度过高,将会影响油墨原有质量; 
      4、根据气候变化,请远离火源,阴暗环境下存放。 Ink characteristics: have and Germany Caili treasure the same color, is mainly used for PP, PE, BOPP and other materials, with a high color, high color, high covering power, alcohol resistant and wear resistance, high stability.
    Printing: silk screen printing can be.
    Table dry and work time: surface dry time natural volatile 5-10 minutes; work time within 24 hours.
    Dilution and cleaning: SV3 slow dry open water, UVK1(printing open water) also can use 718 washing network water cleaning.
    Test method (completely dry):
    1, 3M adhesive tape sticky ink surface adhesion in painting,45 degree angle quickly pulled off the oil;
    2, purity 99% of industrial alcohol, using cotton bag in the surface of the ink one kilogram weight to horizontal force and pull 200 times without decolorization;
    3, wear: the eraser 500g force level wipe 500 times back and forth.
    Method of use:
    1, before the use should be fully mixing, use at any time after the closure;
    2, mixing an additional 10-15% in oil and water, diluted to printing viscosity;
    3, mesh plug mesh can be used when washing network water cleaning;
    4, shall not be mixed with other types of ink.
    The matters needing attention:
    1, the plastic material of similar appearance, but may be of different materials, customers need to try to determine its requirements, and then bulk printing;
    2, in the printing process, such as drawing or spread out,may be appropriate to add some slow dry paste can be;
    3, the ambient temperature is too high, it will affect the quality of the original ink;
    4, according to the climate change, please stay away from fire, stored in dark environment.

电脑版
集萃印花网提供技术支持